Cleaning innovation you have never seen.
The drying chamber can be rotated 90degrees to allow for easy cleaning, without the need for getting inside.
Ideal for small-scale production
TR-Series is the best solution for high-mix low-volume production and production of high-purity materials as well as R&D use.
All atomization modes can be selected with a variety of options. The TR-Series can also be configured to operate both open-cycle and closed-cycle systems. A heat-resistant HEPA filter can be installed for high-purity materials.
|Drying chamber diameter (mm)||φ800||φ1000||φ1200||φ1400||φ1600||φ1900|
|External dimension W (mm)||1900||1900||2300||2400||2500||5000|
|External dimension D (mm)||3200||3400||3600||4100||4400||5700|
|External dimension H (mm)||1800||2000||2200||2300||2500||3400|
|Water evaporation capacity (kg/h)||4||5||8||14||22||28|
|Heater capacity (kW)||6||8||10||18||28||35|
- * The external dimensions include the hot air generator, cyclone and bag house.
- * Heater capacity is a calculated value based on an inlet temperature of 230°C and an outlet temperature of 80°C.
- * Water evaporation capacity is subject to change depending on the atomization mode, inlet temperature, outlet temperature, gas flow, and the installation site conditions.
- * The specifications and other information indicated in this publication may change without notice.
Send an inquiry by contact form
* are required fields.