Enables you to scale up your operation.
Designed to enable scaled up
Inlet and outlet fans come standard to control the internal pressure of the drying chamber, and allow for scaled up operating conditions in the future.
Visibility and operability
The R-Series spray dryer has a large inspection window to allow you to easily check operating conditions. It is also equipped with a large door for easy cleaning and maintenance.
All atomization modes can be selected with a variety of options. The R-Series can also be configured to operate both open-cycle and closed-cycle systems. A heat-resistant HEPA filter can be installed for high-purity materials.
|Drying chamber diameter (mm)||φ800||φ1000||φ1200||φ1400||φ1600||φ1900|
|External dimension W (mm)||1900||2100||2200||2400||2700||3400|
|External dimension D (mm)||2200||2300||2500||2900||3100||3500|
|External dimension H (mm)||1500||1600||1800||2200||2400||3400|
|Water evaporation capacity (kg/h)||4||5||8||14||22||28|
|Heater capacity (kW)||6||8||10||18||28||35|
- * The external dimensions include hot air generator, cyclone and bag house.
- * Heater capacity is a calculated value based on an inlet temperature of 230°C and an outlet temperature of 80°C.
- * Water evaporation capacity is subject to change depending on the atomization mode, inlet temperature, outlet temperature, gas flow, and the installation site conditions.
- * The specifications and other information indicated in this publication may change without notice.
Send an inquiry by contact form
* are required fields.