Detailed design to get exactly the right process.
Advanced heat-recycling system
Our environmentally friendly heat-recycling system enables up to 25% energy savings. The specially designed exhaust heat circulation system reuses the heat of the exhaust gas with high efficiency.
Flexible design
All the atomization modes can be selected with a variety of options. The P-Series can also be configured to operate as both a spray cooler and spray dryer, as well as open-cycle and closed-cycle systems.
Model | P220 | P240 | P260 | P290 | P300 |
---|---|---|---|---|---|
Drying chamber diameter (mm) | φ2200 | φ2400 | φ2600 | φ2900 | φ3000 |
External dimension W (mm) | 3700 | 3900 | 4200 | 4500 | 4600 |
External dimension D (mm) | 3900 | 4400 | 4900 | 6300 | 6500 |
External dimension H (mm) | 3900 | 4400 | 4900 | 5500 | 5700 |
Water evaporation capacity (kg/h) | 32 | 40 | 48 | 53 | 60 |
Heater capacity (kW) | 40 | 50 | 60 | 68 | 80 |
- * The external dimensions include hot air generator, cyclone and bag house.
- * Heater capacity is a calculated value based on an inlet temperature of 230°C and an outlet temperature of 80°C.
- * Water evaporation capacity is subject to change depending on the atomization mode, inlet temperature, outlet temperature, gas flow, and the installation site conditions.
- * The specifications and other information indicated in this publication may change without notice.
Send an inquiry by contact form
PRECI takes your privacy seriously. All information you provide shall be held in strict accordance with our Privacy Policy.
* are required fields.