This is the spray dryer mainly suitable to various high-mix low-volume productions for research and development. By the semi-customization, specifications and installation space suitable to your requirement can be selected.
- Installing the heat discharge circulation device, the design/fabrication considering energy-saving measures is provided.
- By heat-exchanging the exhaust gas from the dryer (about 100゜C) and reusing the air sent to the dryer body, energy-saving is realized and design/fabrication of the device that to be the countermeasure against global heating is provided.
- To enable the production of ultra fine particles, two-fluid nozzle unit can be installed as an option.
- For customers who are aiming to produce relatively large particles, the device design with single-fluid pressure nozzle is recommended.
- We provide a device exclusively used for fusion cooling or a device that can be used also as a spray dryer.
- A device operable with both water solvent and organic solvent can be fabricated.
- Considering the granulation of high-purity product, HEPA filter having heat resistance of 500゜C (trapping efficiency of 0.3μm/99.97%) can be installed.
- Considering the visibility of atomizing condition confirmation of the spray, a large inspection window will be provided.
| Model | Dryer Diameter | Outline Layout Size (X×Y×H) | Concentrated Liquid Processing Amount (reference value) |
Heater Capacity (reference value) |
|---|---|---|---|---|
| P19 | φ 1900 | 3500×3600×3500 | 20kg/h | 22kw |
| P22 | φ 2200 | 3800×4000×4000 | 24kg/h | 28kw |
| P24 | φ 2400 | 4000×4500×4500 | 28kg/h | 32kw |
| P26 | φ 2600 | 4300×5000×5000 | 32kg/h | 38kw |
| P29 | φ 2860 | 4600×6500×5700 | 40kg/h | 45kw |
※The outline layout size includes the hot air generator, cyclone, and bug filter. The concentrated liquid processing and heater capacity are the calculated values where the temperature of hot air is 220゜C and the temperature of discharged air is 100゜C.
