Having the devices of spray dryer as our core, we provide proposal to establish series of facilities such as facility for raw material procurements, classification of supplied equipment/products, transportation, and retention/packaging utilizing our experiences and achievements.
| Spray Method | ： | Nozzle |
|---|---|---|
| Dryer Diameter | ： | φ4.8m |
| Total Height | ： | 18m |
| Water Evaporation Amount (reference value) |
： | 1200kg/h |
| Spray Method | ： | Atomizer |
|---|---|---|
| Dryer Diameter | ： | φ4.8m |
| Total Height | ： | 12m |
| Concentrated Solution Processing Amount (reference value) |
： | 450kg/h |
| Spray Method | ： | Nozzle |
|---|---|---|
| Dryer Diameter | ： | φ4.8m |
| Total Height | ： | 18m |
| Water Evaporation Amount (reference value) |
： | 1200kg/h |
※The water evaporation amount and concentrated solution processing amount are the calculated values where the temperature of hot air is 220゜C and the temperature of discharged air is 100゜C.
- We realize the high-level of recovery efficiency utilizing our accumulated experiences and provide design/fabrication with small raw material loss.
- We have human resources and technology systems that are able to support of controls and factory automation of the device.
- By heat-exchanging and reusing the exhaust gas (about 100゜C) from the dryer, we realized energy-saving and design/fabricate earth-friendly devices.
- By installing a heat discharge circulation device etc., we provide design/fabrication in which energy-saving measures are incorporated.
- For customers who need large particles, we design/fabricate devices with single-fluid pressure nozzle.
- We provide a device exclusively used for fusion cooling or a device that can be used also as a spray dryer.
- A device operable with both water solvent and organic solvent can be fabricated.
- For high-purity products, HEPA filter having heat resistance of 500゜C (trapping efficiency of 0.3μm/99.97%) can be installed as an option.
