Testing and Consignment processing From the early stages of R&D to large 24-hour-production planning as well as any concerns about your current production process, we offer high-value testing and consultation services with great know-how accumulated over many years. The Powder Technical Center (PTC) is located in Kanagawa prefecture, Japan, with a wide variety of spray dryers and analytical equipment. Our highly experienced and qualified testing engineers offer services with advanced process evaluations by measuring and analyzing the characteristics of your applications such as solid content, viscosity, moisture content, particle size distribution and particle formation. These evaluations are reflected in the testing process in real-time to achieve your specific requirements. We also offer a consignment processing service. The service is available in capacities of up to a few tons of liquid material per batch.
Do you have any requirements like this?
- Sample/trial powders are needed for my development of new materials
- Consignment production is required as we do not have the facility in-house
- Unable to purchase a new dryer as we are still at earlier phase
- Product samples are needed until our new facility starts operating
- We don’t have the time and resources to gain production knowhow
Available facilities
Spray boy
- Atomization mode:
- Two-fluid nozzle
- Water evaporation capacity:
- up to 3 kg/h
- Targeted particle size:
- a few micrometers to 30μm
- System:
- Open-cycle system, Closed-cycle system
P260
- Atomization mode:
- Rotary atomizer, Two-fluid nozzle, Pressure nozzle
- Water evaporation capacity:
- up to 30 kg/h
- Targeted particle size:
- a few micrometers to 120μm
- System:
- Open-cycle system
LS-6nms
- Atomization mode:
- Two-fluid nozzle
- Material feed capacity:
- up to 6kg/h
- Targeted particle size:
- 10μm to 700μm
- Remark:
- Freeze drying process is included
TR160
- Atomization mode:
- Rotary atomizer, Two-fluid nozzle
- Water evaporation capacity:
- up to 15 kg/h
- Targeted particle size:
- a few micrometers to 80μm
- System:
- Open-cycle system, Closed-cycle system
D350
- Atomization mode:
- Rotary atomizer, Two-fluid nozzle, Pressure nozzle
- Water evaporation capacity:
- up to 50 kg/h
- Targeted particle size:
- a few micrometers to 200μm
- System:
- Open-cycle system
CS30
- Atomization mode:
- Two-fluid nozzle
- Material feed capacity:
- up to 15kg/h
- Targeted particle size:
- 10μm to 400μm
- Remark:
- Freeze drying process is included
* Water evaporation capacity is subject to change depending on the operating conditions.
How to apply
We accept inquiries by telephone and email, and via our website. When making an inquiry, we request that you fill out our ‘Testing/Consignment processing check sheet’ in order to help us understand your requirements. The check sheet can be downloaded from our website.
Testing/Consignment Processing Check Sheet PDF download（130KB）
Send an inquiry by contact form
PRECI takes your privacy seriously. All information you provide shall be held in strict accordance with our Privacy Policy.
* are required fields.
